Sidebar

LKJ Prod

  • Accueil
  • Informatique
    • Articles
    • Articles Linux
      • Trucs Mysql-MariaDB
    • Articles Windows
    • Articles Logiciels
      • Bureautique
  • Linux
  • Rugby
    • Saison 2019 2020
    • Saison 2020 2021

Sauvegarde Windows 2003 épisode 2

Voici résumé ci-dessous l'ensemble des problémes de sauvegardes que j'ai rencrontré sous windows 2003 serveur et comment je les ai résolus.

 

1 - Erreur de sauvegarde avec des Lecteurs TRAVAN 40 ( marque Seagate, Quantum ou Certance ) STT3401A

    Nature du probléme : Les sauvegardes parfois se font mais dés fois le média n'est pas monté et erreur de sauvegarde.

    1.1 : Mettre à jour le driver du lecteur : ICI

    1.2 : Voir la KB suivante 823820 : ICI 

WIndows 2003 et serveur secondaire

Q : Y a t il des pré-requis particuliers (autre que la présence du service pack 1) pour l'installation de R2 sur un contrôleur de domaine AD Windows 2003 ?

R : R2 sur un DC Windows 2003 SP1 nécessite au préalable la mise à jour du schéma dans la version R2. Pour ceci, il suffit d'éxécuter Adprep.exe /forestprep. Adprep.exe est un outil en ligne de commande disponible dans le répertoire Cmpnents\r2\adprep sur le CD d'installation de R2. Plus d'info ici :


http://go.microsoft.com/fwlink/?LinkId=46565

Ubuntu et double carte et double ecran

Comment avoir sur une seule machine la gestion du double écran alors que l'on n'a pas de double sortie sur sa carte vidéo ?

Avec linux c'est possible

installez votre carte vidéo dans un emplacement PCI libre

au démarrage en console tapez : lspci | grep VGA

vous trouverez les caractéristique de vos cartes vidéo et notamment de la  nouvelle installée

ex pour moi  :

00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)
01:00.0 VGA compatible controller: Trident Microsystems 3DImage 9750 (rev f3)

j'ai donc le fichier /etc/X11/xconf.org suivant

 # /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
  FontPath "/usr/share/fonts/X11/misc"
  FontPath "/usr/share/fonts/X11/cyrillic"
  FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
  FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
  FontPath "/usr/share/fonts/X11/Type1"
  FontPath "/usr/share/fonts/X11/100dpi"
  FontPath "/usr/share/fonts/X11/75dpi"
  # path to defoma fonts
  FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
  Load "i2c"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  Load "freetype"
  Load "int10"
  Load "vbe"
  load "glx"
  load "GLcore"
  load "v4l"
EndSection

Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver "kbd"
  option "CoreKeyboard"
  option "XkbRules" "xorg"
  option "XkbModel" "pc105"
  option "XkbLayout" "fr"
  option "XkbVariant" "oss"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver "mouse"
  option "CorePointer"
  option "Device" "/dev/input/mice"
  option "Protocol" "ImPS/2"
  option "ZAxisMapping" "4 5"
  option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "stylus"
  option "Device" "/dev/input/wacom"
  option "Type" "stylus"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "eraser"
  option "Device" "/dev/input/wacom"
  option "Type" "eraser"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "cursor"
  option "Device" "/dev/input/wacom"
  option "Type" "cursor"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
  identifier "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
  boardname "i810"
  busid "PCI:0:2:0"
  driver "i810"
  screen 0
EndSection

Section "Device"
  identifier "Trident Microsystems 3DImage 9750"
  boardname "Trident 3DImage975 (generic)"
  busid "PCI:1:0:0"
  driver "trident"
  screen 0
  vendorname "Trident"
EndSection

Section "Monitor"
  identifier "Generic Monitor"
  vendorname "Acer"
  modelname "Aspire 77s"
  HorizSync 30.0-72.0
  VertRefresh 50.0-120.0
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  gamma 1.0
EndSection

Section "Monitor"
  identifier "Monitor2"
  vendorname "Generic"
  modelname "Flat Panel 1024x768"
  HorizSync 31.5-55
  VertRefresh 40-70
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  gamma 1.0
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
  Monitor "Generic Monitor"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    modes "1280x1024@60" "1400x1050@60" "1280x960@60" "1152x864@75" "1024x768@43" "1024x768@60" "1024x768@70" "1024x768@75" "1024x768@85" "832x624@75" "800x600@60" "800x600@85" "800x600@75" "800x600@72" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
  EndSubSection
EndSection

Section "Screen"
  Identifier "Screen2"
  Device "Trident Microsystems 3DImage 9750"
  Monitor "Monitor2"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    modes "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
  EndSubSection
EndSection

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  screen 1 "Screen2" rightof "Default Screen"
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  InputDevice "stylus" "SendCoreEvents"
  InputDevice "cursor" "SendCoreEvents"
  InputDevice "eraser" "SendCoreEvents"
  option "Xinerama" "on"
#"-" "Using" "/etc/X11/Xorg.conf"
  option "Clone" "off"
EndSection

Section "DRI"
  Mode 0666
EndSection
Section "ServerFlags"
  option "Xinerama" "true"
EndSection

Sauvegarde Windows 2003

Suite à divers probléme sur des serveus 2003 R2 lors des sauvegardes plannifiés comme sou swindows 2000, j'ai décidé de créer cette page spécifique à windows 2003

suivre les instructions de la page sous windows 2000  : ici

puis faire les verifications suivantes

Le fichier Batch ainsi que certains outils sont ici 

le fichier batch est a decompresser a la racine du c:

il devrait fonctionner directement ( à verifier Frown )

    A faire à la main :

  • 1 - Pensez à modifier le fichier Batch au niveau des adresses et des mots de passe.
  • 2 - Utiliser la commande rsm view /TLIBRARY pour connaitre votre lecteur
  • 2 - Lancer l'install de dumpel.
  • 3 - copier le fichier sleep.exe dans le même répertoire.

Microsoft : ici

Forum hardware : ici et la

Encore une nouvelle MAJ

Je vais faire le test du soft suivant pour l'envoi de mail http://logitheque.com/tel.asp?I=13456  

suivre les liens suivants 

sleep.exe

dumpel 

ubuntu 6.06 et Axim X50v

pour connecter vote axim X50v

suivez les instructions suivantes

http://doc.ubuntu-fr.org/materiel/pocketpc

attention pour moi la ligne de lien est la suivante

sudo ln -s /usr/lib/libgtop-2.0.so.7.0.0 /usr/lib/libgtop-2.0.so.2

 

mais aussi

http://doc.ubuntu-fr.org/materiel/smartphone

pour la partie suivante

Pour Ubuntu

Dommage pour vous, il n'y a pas de paquet sur le dépôt pour gnome. Mais j'ai une série de paquets pour gnome que j'ai converti avec alien. Télécharger synce-trayicon + synce-gnomevfs + synce-software-manager. Le lien ci-dessus étant rompus, j'ai mis ces fichiers ici J'ai créé aussi ces 3 paquets pour Dapper

Attention à bien préciser dans la ligne de commande le chemin de ces paquets, ce que je n'ai pas fait dans l'exemple ci-dessous. Sinon dpkg ne marchera pas.

localhost:~$ sudo dpkg -i synce-trayicon synce-gnomevfs synce-software-manager

Lancer synce-trayicon

localhost:~$ synce-trayicon

cliquer droit sur le nouvel icône de la zone de notification (haut droite) Vous pouvez installer des programmes ou explorer les fichiers de votre smartphone.

Sur Breezy, libgtop est en version 2.0.5 alors que synce-trayicon vous demandera libgtop 2.0.2 il suffit de créer un lien symbolique avec la commande suivante:

localhost:~$sudo ln -s /usr/lib/libgtop-2.0.so.5.1.0 /usr/lib/libgtop-2.0.so.2

et tout rentre dans l'ordre

 

Plus d'articles...

  1. Meebo
  2. Windows 2003 et TSE
  3. Firefox et Thunderbird
  4. Les convertisseurs universels en ligne

Sous-catégories

Linux

Logiciels

Windows

Materiel

Page 30 sur 34
  • Début
  • Précédent
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • Suivant
  • Fin
Bootstrap is a front-end framework of Twitter, Inc. Code licensed under MIT License. Font Awesome font licensed under SIL OFL 1.1.
Powered by T3 Framework